hi everybody

hey everybodyim from doncaster
i live in my own house
i have a modified fiat bravo running around 190bhp and also running 75 hp shot of nitous through wzards of nos venom jets.A fiesta courier van which will be running a 2.0ltr zetec once i finde a decent donor car.im 23 i run my own businesss
i have a daughter called jessica
thanks for readingmick

here are my cars:
the fiat bravo.well here are some pics and also vids and a list of the stuff i have done so far izards of nos streetblaster 150i kit
Wizards of nos 75hp venom jets
Wizards of nos throttle position box
Wizards of nos 5ib chrome bottle
Wizards of nos bottle warmer
Piper cams re-profiled cams
Denso irridiun plugs
KN 57i induction kit
Green cotton oil breather filter
Sparco strut brace
Fiat coupe 20v turbo inlet plenum
Fiat coupe 20v turbo throtle body ( widened out 4mm )
Fiat coupe 20v turbo fuel rail
Fiat coupe 20v turbo 350cc injectors
Magnex backbox
Custom mid section widened 10mm
Custom decat to fit new mid section
Tim oil pressure gauge with electronic sender unit
Sparco pedals
Tim oil temp gauge
Fse adjustable fuel regulator
Ported head on air/exhaust outlets
Widened inlet tubes 5mm
Pi springs on front
New kyb dampers on front
Pi springs on back
New kyb dampers on back
Tarrox G88 discs on front 284mm
Tarrox G88 discs on back
Tarrox pads on front (fast road)
Tarrox pads on back (as above)
20mm spacers on front (soon to be 15mm)
20mm spacers on back
17 MVK alloys
205.40.17 tyres on front
205.40.17 tyres on back
Fiat marea bumper on front
Black reclining bucket seats in front
Jbl Components in front
Jbl components in rear qtrs
Shortend gear stick
Custom A-piller pod mounting
Custom dial surround
INXX bonet lifters
now the pictures:
before i set to cleaning it up

the gauges

the front disc

the rear discs

the rear qtr ith the speakers

the gauges in car


the gear shift

before wheels

after

the bonnet lifters

the old intake system

the new system




the pedals

the dials

the cams

the new intake system

the back


the spacers

the indicator

the seats


the nitrous

the car before new bumper

engine now

new bumper it doesnt look very prety at min but will do after all the smoothing



the washers im smoothing in my new bumper




my new head


thats going to be fully ported and pollished and skimed to raise CRnow please ignore the running comentry it was meant for a couple on a different site.http://i97.photobucket.com/albums/l226/DONNYLAD_2006/green%20hgt%20project/th_revving-1.jpghttp://i97.photobucket.com/albums/l226/ ... ving-1.jpg" border="0" OnLoad="if(this.width > 400) {this.width=400}" style="cursor: hand" border="0">
the engine is fine it had just been stood a while lol this was the first hard revving after warm up it had .



first start after the new injectors but like a nob i forgot to plug the tps in ith all the excitement
this is the car as it standse

the van